Hello,
Please help!!
I have installed the out-of-the-box retail version (1.0).
Everytime I attempt to start the application, my monitor displays a black screen only, but I can hear the audio. I have installed Gal2 v1.2, but have experienced no change after starting the application (still, black screen and audio plays...intro I think).
I have rebooted several times and have uninstalled both versions a few times. Still, no change during application start up. I am now back to v1.2 and have checked my video drivers and they are up to date, forced Anti-aliasing off and played with screen resolution (just in case) - it is now at 1280x1024. Still nothing different.
Please see below, my debug file - sure would appreciate any suggestions.
Thanks,
TAAZZ
Debug Message: Version v1.2 last updated on: Mon Jun 12 18:04:26 2006
Debug Message: *********DXDiag info follows.*********
System Info
Time: 8/26/2006, 17:33:32
DirectX Version: DirectX 9.0c (4.09.0000.0904)
Machine Name: TAAZZ
Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301-1519)
Languages: English (Regional Setting: English)
System Manufacturer: GATEWAY
System Model: T3985
BIOS: BIOS Date: 12/15/04 23:53:45 Ver: 08.00.10
Processor: Intel(R) Celeron(R) CPU 2.93GHz
Physical Memory: 1006MB RAM
Page File: 415MB used, 2009MB available
Windows Dir: C:\WINDOWS
Display Info
Display device 1:
Device Name: \\.\DISPLAY1
Card Name: NVIDIA GeForce FX 5500
Manufacturer: NVIDIA
Chip Type: GeForce FX 5500
DAC Type: Integrated RAMDAC
Key Device: Enum\PCI\VEN_10DE&DEV_0326&SUBSYS_196C270F&REV_A1
Display Memory: 256.0 MB
Current Display Mode: 1280 x 1024 (32 bit) (60Hz)
Monitor Name: SyncMaster 930B(Analog)
Monitor Max Resolution: 1280,1024
Driver Name: nv4_disp.dll
Driver Version: 6.14.0010.8198
Driver Date: 12/10/2005 04:06:00
DirectX Acceleration Enabled: Yes
Display device 2:
Device Name: \\.\DISPLAY2
Card Name: Intel(R) 82865G Graphics Controller
Manufacturer: Intel Corporation
Chip Type: Intel(R) 82865G Graphics Controller
DAC Type: Internal
Key Device: Enum\PCI\VEN_8086&DEV_2572&SUBSYS_4043107B&REV_02
Display Memory: 96.0 MB
Current Display Mode: 1024 x 768 (32 bit) (75Hz)
Monitor Name: Default Monitor
Monitor Max Resolution:
Driver Name: ialmrnt5.dll
Driver Version: 6.14.0010.4299
Driver Date: 4/5/2005 15:38:44
DirectX Acceleration Enabled: Yes
Sound info
Sound device 1:
Description: SB Audigy 2 Audio [B800]
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1102&DEV_0008&SUBSYS_10011102&REV_00
Manufacturer ID: 1
Product ID: 100
Driver Name: ctaud2k.sys
Provider: Creative
Driver Version: 5.12.0001.0522
Driver Date: 4/28/2004 23:01:00
Type: WDM
Other Drivers:
Acceleration Level: 3
Cap Flags: 0
Min/Max Sample Rate: 0, 0
Sound device 1:
Description: Realtek AC97 Audio
Default Sound Playback: No
Default Voice Playback: No
Hardware ID: PCI\VEN_8086&DEV_24D5&SUBSYS_4043107B&REV_02
Manufacturer ID: 1
Product ID: 100
Driver Name: ALCXWDM.SYS
Provider: Realtek Semiconductor Corp.
Driver Version: 5.10.0000.5740
Driver Date: 10/27/2004 18:57:38
Type: WDM
Other Drivers:
Acceleration Level: 3
Cap Flags: 0
Min/Max Sample Rate: 0, 0
Debug Message: *********END dxdiag info.*********
Debug Message: Entering WinMain
Debug Message: ******* Starting Game Shell *******
Debug Message: Going Fullscreen
Debug Message: Preparing to change display settings.
Debug Message: Multisample Type chosen in prefs not supported. Disabling multisampling.
Debug Message: Using multilsample setting: D3DMULTISAMPLE_NONE
Debug Message: Game Resolution: 1024 x 768
Debug Message: Running fullscreen.
Debug Message: HAL (sw vp): Intel(R) 82865G Graphics Controller
Debug Message: D3DPRESENT_INTERVAL_DEFAULT
Debug Message: Refresh rate: 75
Debug Message: Bit Depth: 32 bit.
Debug Message: *********Checking D3DDevice Caps***********************
Debug Message: A full-color cursor is supported in hardware at high resolution modes.
Debug Message: RGB in format 6:6:6, Masks reported as ff0000:ff00:ff
Debug Message: Now Fullscreen
Debug Message: Shell initialization complete
Debug Message: ***** Initializing Game *****
Debug Message: Timer Frequency is 0 369e99
Debug Message: Initializing sound card.
Debug Message: initailizing bink
Debug Message: Create setup screens.
Debug Message: Clear galaxy settings.
Debug Message: Clear influence.
Debug Message: Clear up laws.
Debug Message: Clear first time events.
Debug Message: Clear wonders and trade goods.
Debug Message: Clear sector mapper.
Debug Message: * Collectors Edition *
Debug Message: Set mouse.
Debug Message: Set update timer.
Debug Message: WM_CLOSE message received.
Debug Message: GameUninitialize start
Debug Message: Killing Galaxy
Debug Message: Killing threads.
Debug Message: Kiling civs.
Debug Message: Killing ships.
Debug Message: Killing rallypoints.
Debug Message: Killing misc objects.
Debug Message: Killing stars.
Debug Message: Killing anomalies.
Debug Message: Killing space resources.
Debug Message: Killing colonies and planets.
Debug Message: killing scenario.
Debug Message: Clearing Turn Event Log
Debug Message: Clear galaxy settings.
Debug Message: Clear influence.
Debug Message: Clear up laws.
Debug Message: Clear first time events.
Debug Message: Clear wonders and trade goods.
Debug Message: Clear sector mapper.
Debug Message: Clear data definitions.
Debug Message: Killing Galaxy: Completed
